Top » Catalog » Power Supplies » I-Star »

$391.00

iStar 300w TC-2U/300R6 Redundant Power Supply

 
 
Specifications:
  • Model Number: TC-300 R6
  • Output Wattage: 300w
  • AC input: 90 to 132 or 180 to 264 auto selectable 47Hz ~ 63Hz
  • Dimensions: 117 x 86 x 180mm (wxhxd)
  • Connectors: 20-Pin; 8-Pin 12V; 4-Pin 12V
  • Temperature Range: Operation 0C~50C
  • Hold Up Time: 16ms at maximum load & normal input voltage
  • Efficiency: 68% Typical (Normal Line)
  • Power Good Signal: Should be asserted high to indicate that +5VDC and +3.3 VDC output are above the lower voltage thresholds. Compatible signal out with 100ms to 500ms.
  • Over Power Protection: The power supply shall shut down when output power exceeds 130 to 160 of full load.
  • Over Voltage Protection: Standard on +5.0V, set at 6.25VDC +-0.75VDC
  • Short Circuit Protection: A short circuit placed between the DC return and the output shall cause no damage and the power supply shall shutdown.
  • EMI: FCC part 15, subpart B, Class B, EN55022 CISPR22.2
  • Agency Approvals: UL 6950 , CSA C22.2 No. 60950, TUV (IEC60950)
  • Remote On/Off Control: When PS-ON is pulled to TTL Low, the DC output is to be enabled. When PS-OFF is pulled to TTL high, the DC output is to be disabled.
  • Cooling: By forced air 2 x 40mm 1 x 80mm DC Ball Bearing Fan
Output:
  • Voltage:
  • +5V +12V +3.3V -12V -5V +5Vsb
  • Max. Load:
  • 30A 12A 15A 0.8A 0.5A 2A
  • Min. Load:
  • 8A 4A .03A 0.1A 0.1A 0.1A
  • Regulation:
  • +/-5% +/-5% +/-0% +/-0% +/-5% +/-5%
  • Ripple(mV):
  • 50 120 50 120 50 50
    *The Combined total power from +5V & +3.3V shall not exceed 150w
Reviews
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
0 items