Top » Catalog » Power Supplies » I-Star »


iStar 700w TC-430A Redundant Power Supply

TC-430A is an N+1 redundant power supply with three 400W modules. It can provide a combinational power output up to 800W. With a careful system configuration, you can achieve a 99.99% uptime. It also provides high total power output, perfect for systems that require more power.

  • Model Number: TC-430 A
  • Output Wattage: 700w
  • AC input: 90 to 132 or 180 to 264 auto selectable 47Hz ~ 63Hz
  • Dimensions: 120 x 165 x 200mm (wxhxd)
  • Connectors: 24-Pin; 8-Pin 12V; 4-Pin 12V
  • Auto Select AC input
  • Hot-Swappable & Power Sharing capability (Patent no. 136053)
  • Dual AC Input Design: AC-1: Primary source, AC-2: Secondary source
  • Real Dual AC Patent : Taiwan, USA, Germany, China
  • Voltage:
  • +5V +12V +3.3V -12V -5V +5Vsb
  • Max. Load:
  • 60A 15A 24A 0.8A 0.5A 2A
  • Min. Load:
  • 3A 2A 0.3A 0.1A 0.1A 0.1A
  • Regulation:
  • ?5% ?5% ?0% ?0% ?5% ?5%
  • Ripple(mV):
  • 50 120 50 120 50 50
  • Noise Test - Noise bandwidth is from DC to 20 MHz
  • Ripple frequencies greater than 1MHz shall be attenuated by the measurement System
  • Add 0.1uF/10uF capacitor at output connector terminals for ripple and noise measurements
  • Remote On/Off Control:
  • When PS-ON is pulled to TTL Low, the DC output is to be enabled.
  • When PS-OFF is pulled to TTL high, the DC output is to be disabled.
  • PW-OK is power good signal and should be asserted high by the power supply to indicate that +5VDC and +3.3VDC output are above the under voltage thresholds of the power supply TTL. compatible signal out with 100ms to 500ms.
Quick Find
Use keywords to find the product you are looking for.
Advanced Search
0 items